A good building starts with a good foundation ......
24/7 Prices for Contractors !
Pre-approved contractors may download prices after hours on our web site. We have recently introduced a secure area of this website to help our valuable contractors.
The big news as far as our products are concerned, was
The commitment this year to sell the new brown
coloured Pressure Treated Lumber. Sales in this
product have exceeded expectations! It looks as
the days of green coloured Pressure Treated lumber
We stock an inventory of cement blocks. The sizes range from 4" to 12". Concrete blocks are 16" long. You can either buy small quantities out of our yard or we can arrange with the manufacturer to have full house loads shipped directly to your site. (See attached photo). Generally, in this truckload situation, we need 2 or 3 days advance notice. We can calculate the number of blocks that you need including the corner blocks.
We also stock the necessary cement and forming boards. If you need a contractor, you can refer to our "Contractor Referrals" section of our menu under " Foundations".
As you can see from the picture, we also can rent you the necessary scaffolding for the job. Our design department can figure out the size of block that you will require. There are a number of factors but the backfill height is one of the most important issues.
Drainage Products and Accessories
With a multitude of sizes, shapes, coatings and materials options, Armtec’s corrugated steel pipe (CSP) and related products offer unparalleled versatility and flexibility in designing drainage solutions. In addition, corrugated steel pipe has distinct advantages over other materials because of its light weight, strength, ease of installation, low maintenance and adaptability to various field conditions.
CSP is manufactured from pre-coated steel coil, corrugated and formed into pipe. The range of coatings includes galvanized steel, aluminized steel type 2 and a polymer-laminated coating. Steel thickness and corrugation profile depend on the type of structure, height of cover and live load over the structure.
- High strength
- Long service life
- Fast installation
- Can be nested for economical shipping
- Road culverts
- Storm sewers
- Stormwater detention systems
- Utility galleries and conduits
- Structure relines
Corrugated Tubing Plastic
Big 'O' provides a complete range of drainage tubing products designed to collect and remove subsurface water in various situations. From solid to perforated, or perforated with sock we have a product applicaton. We carry 4" perforated, solid, Hydro and Filtered. We also carry 6" perforated.
Plastic Culverts Boss 2000
BOSS 2000 is a dual-wall corrugated HDPE drainage pipe with a smooth inner wall to offer superior hydraulic performance for both storm sewers and culvert applications, ranging from diameters of 100mm to 900mm.
BOSS 2000 is offered in two product lines:
- Municipal and highway storm sewer and culverts: 320kPa stiffness; certified to CSA B182.8 with the CSA logo; 6m lengths; bell and gasket joints
- Resource road culverts: 210kPa – 260kPa stiffness; conforming to CSA B182.8 (no CSA logo); 9.5m lengths; plain ends
The pipe wall can also be factory perforated and fitted with a woven geotextile sock for use in subdrain or recharge drainage applications.
A wide variety of fabricated fittings certified to CSA B182.8 are available, as well as fittings necessary to tie in PVC pipe, such as Inserta-tees and SDR adapters.
- Impact resistant to avoid installation damage
- Abrasion resistance
- Resistant to a wide range of chemicals
- Resistant to strong acids and bases (pH range 1.25 to 14)
- Fast installation – lightweight and long lengths with fewer joints
- Quick on-site cutting – can be trimmed to length in seconds
- Municipal and highway storm sewers and culverts
- Resource road culverts
- Recharge drainage systems
- Leachate collection systems
- Stormwater management
- Airport runway sewers
- Diameters (mm) – 100, 150, 200, 250, 300, 375, 450, 525, 600, 750, 900
- Length (m) – 6m or 9.5m (resource road culverts only)
SUPERSEAL Dimpled Membrane is an extremely durable, inexpensive and easy to use waterproofing membrane. It can be used on all types of foundations and does not require any additional coatings. It is manufactured to the largest and widest variety of roll sizes, worldwide.
SUPERSEAL Dimpled Membrane is made from tough, long lasting plastic that keeps exterior moisture out. It prevents backfill material from touching the foundation wall and bridges typical wall cracks with ease. The dimples in the membrane create a drainage space that allows the wall to breathe. It keeps 100% of the headwater pressure off the face of the wall. This space allows moisture to condensate outward on to the membrane. By gravity, the moisture then falls to the footing drain for removal.
We stock this product including the accessories. Ask one of our sales representatives about this product or view the instructional videos online.